Type: | Piezoelectric |
---|---|
Output Signal Type: | Analog Output |
Measuring Shaft Quantities: | Single |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
RH102 Technical Specification | |||||
Parameter | Index | Remarks | |||
Sensitivity | 100mv/g | ||||
Acceleration Range | 80g | ||||
Amplitude Linearity | 1% | ||||
Frequency Response(±10%) | 0.7~10000Hz | ||||
Frequency Response(±3 dB) | 0.4~15000Hz | ||||
Resonance Frequency | 26KHz | ||||
Transverse Sensitivity | ≤5% | ||||
Mount screw thread | 6mm | ||||
Bias Voltage | 10-12VDC | ||||
Constant Current | 2-20mA,Typical 4mA | ||||
Voltage Excitation | 18-30VDC, Typical | 24VDC | |||
Output Impedance | <100Ω | ||||
Casting Dielectric Resistance | >108Ω | ||||
Maximum Shock Level | 5000g | ||||
Weight | 92g | ||||
Dimensions |
24.5 x 32 x 43.7
|
||||
(mm) | |||||
Sealing arrangements | Laser welding | ||||
Transducer composition | Plane shear | ||||
IP Grade | IP 68 | ||||
Casting Material | 316L Stainless Steel | ||||
Output Mode | Side Output,2 pin Mil-C-5015 | ||||
Temperature Range | -40~+125ºC | ||||
Mount Torque | About 2.7~6.8N.m (M6) | ||||
Certificate | CE | ||||
Anti-explosion options | |||||
Anti-explosion Identification | ExiaIICT4 | Used for 0 Area, 1 Area, 2 | |||
Area | |||||
Temperature measuring options (not standard configuration, optional) | |||||
Measuring Range | 0~120ºC | 1.Corresponding model | |||
No.: RH102T. | |||||
Sensitivity | 10mv/ºC | 2.Side output, 3 pin | |||
Mil-C-5105 |